The command that should be implemented on unused switch ports in order to provide basic security configuration is "shutdown". This command disables the switch port, preventing unauthorized devices from connecting to the network through it. Here are the steps:

1. Enter the global configuration mode by typing "configure terminal" or "conf t" in the command line interface.
2. Select the interface you want to shutdown. For example, if you want to shutdown port 1, you would type "interface fastEthernet 0/1" or "int fa 0/1".
3. Type "shutdown" to disable the port.
4. Exit the interface configuration mode by typing "exit".
5. Save your changes by typing "write memory" or "copy running-config startup-config".

Remember, it's important to secure all unused ports to prevent unauthorized access to your network.

Question

The command that should be implemented on unused switch ports in order to provide basic security configuration is "shutdown". This command disables the switch port, preventing unauthorized devices from connecting to the network through it. Here are the steps:

1. Enter the global configuration mode by typing "configure terminal" or "conf t" in the command line interface.
2. Select the interface you want to shutdown. For example, if you want to shutdown port 1, you would type "interface fastEthernet 0/1" or "int fa 0/1".
3. Type "shutdown" to disable the port.
4. Exit the interface configuration mode by typing "exit".
5. Save your changes by typing "write memory" or "copy running-config startup-config".

Remember, it's important to secure all unused ports to prevent unauthorized access to your network.

Knowee AI · Accepted Answer

The command that should be implemented on unused switch ports in order to provide basic security configuration is "shutdown". This command disables the switch port, preventing unauthorized devices from connecting to the network through it. Here are the steps:

1. Enter the global configuration mode by typing "configure terminal" or "conf t" in the command line interface.
2. Select the interface you want to shutdown. For example, if you want to shutdown port 1, you would type "interface fastEthernet 0/1" or "int fa 0/1".
3. Type "shutdown" to disable the port.
4. Exit the interface configuration mode by typing "exit".
5. Save your changes by typing "write memory" or "copy running-config startup-config".

Remember, it's important to secure all unused ports to prevent unauthorized access to your network.

What command should be implemented on unused switch ports in order to provide basic security configuration?a.no shutdownb.shutdown

Question

What command should be implemented on unused switch ports in order to provide basic security configuration?

Solution

Similar Questions

Upgrade your grade with Knowee