When a wireless network in a small office is being set up, which type of IP addressing is typically used on the networked devices?privatenetworkwirelesspublic

When setting up a wireless network in a small office, the type of IP addressing typically used on the networked devices is private. This is because private IP addresses are reserved for use within your local network and are not accessible from the internet, which helps to enhance the security of your network. Here are the steps:

1. Choose a private IP address range: Private IP addresses typically start with 192.168.x.x, 172.16.x.x-172.31.x.x, or 10.x.x.x.

2. Configure your router: Access your router's settings and set it to use the private IP address range you chose. This will be the IP address of your router on your local network.

3. Set up DHCP: Most routers have a built-in DHCP (Dynamic Host Configuration Protocol) server. This automatically assigns a private IP address to each device that connects to your network.

4. Connect your devices: When you connect a device to your network, it should automatically receive a private IP address from your router's DHCP server.

5. Check the IP address: You can check the IP address of a device to make sure it's been correctly assigned a private IP address. On most devices, you can do this by looking in the network settings.

Remember, while private IP addresses are great for local networks, you'll need a public IP address if you want to host a server that's accessible over the internet. Your internet service provider typically assigns this.