A power supply is commonly attached to a tower case using screws. Here are the steps:

1. First, you need to align the power supply unit (PSU) with the corresponding holes in the tower case. The PSU should be positioned so that its fan faces downwards or towards the outside of the case, depending on the design of your case.

2. Once the PSU is properly aligned, you will see the screw holes of the PSU lining up with the screw holes on the case.

3. Now, take the screws that came with the PSU or the case. They are usually standard screws that can be tightened with a Phillips-head screwdriver.

4. Insert the screws into the holes and start tightening them. Do not fully tighten the first screw. Instead, insert all screws loosely at first to ensure proper alignment.

5. Once all screws are in place, you can tighten them. Do not over-tighten as this could damage the PSU or the case.

6. After all screws are tightened, the PSU should be securely attached to the case.

Remember to always be careful when handling computer components to avoid any damage.

Question

A power supply is commonly attached to a tower case using screws. Here are the steps:

1. First, you need to align the power supply unit (PSU) with the corresponding holes in the tower case. The PSU should be positioned so that its fan faces downwards or towards the outside of the case, depending on the design of your case.

2. Once the PSU is properly aligned, you will see the screw holes of the PSU lining up with the screw holes on the case.

3. Now, take the screws that came with the PSU or the case. They are usually standard screws that can be tightened with a Phillips-head screwdriver.

4. Insert the screws into the holes and start tightening them. Do not fully tighten the first screw. Instead, insert all screws loosely at first to ensure proper alignment.

5. Once all screws are in place, you can tighten them. Do not over-tighten as this could damage the PSU or the case.

6. After all screws are tightened, the PSU should be securely attached to the case.

Remember to always be careful when handling computer components to avoid any damage.

Knowee AI · Accepted Answer