Raid 10 uses both a. Mirroring for redundancy and b. Striping for speed. It does not use c. Parity for redundancy.

Here's a step-by-step explanation:

1. Mirroring (also known as RAID 1): This is a technique used to store the same data on two different drives. This is done for redundancy. If one drive fails, the data is still available on the other drive. RAID 10 uses this technique.

2. Striping (also known as RAID 0): This is a technique used to improve the speed of data reading and writing. Data is split into blocks and each block is written to a separate disk drive. RAID 10 also uses this technique.

3. Parity for redundancy (used in RAID 5 and RAID 6): This is a technique where the data is spread across all the drives and parity information is also written to the drive. This parity information can be used to rebuild data if a drive fails. However, RAID 10 does not use this technique.

Question

Raid 10 uses both a. Mirroring for redundancy and b. Striping for speed. It does not use c. Parity for redundancy.

Here's a step-by-step explanation:

1. Mirroring (also known as RAID 1): This is a technique used to store the same data on two different drives. This is done for redundancy. If one drive fails, the data is still available on the other drive. RAID 10 uses this technique.

2. Striping (also known as RAID 0): This is a technique used to improve the speed of data reading and writing. Data is split into blocks and each block is written to a separate disk drive. RAID 10 also uses this technique.

3. Parity for redundancy (used in RAID 5 and RAID 6): This is a technique where the data is spread across all the drives and parity information is also written to the drive. This parity information can be used to rebuild data if a drive fails. However, RAID 10 does not use this technique.

Knowee AI · Accepted Answer

Raid 10 uses both a. Mirroring for redundancy and b. Striping for speed. It does not use c. Parity for redundancy.

Here's a step-by-step explanation:

1. Mirroring (also known as RAID 1): This is a technique used to store the same data on two different drives. This is done for redundancy. If one drive fails, the data is still available on the other drive. RAID 10 uses this technique.

2. Striping (also known as RAID 0): This is a technique used to improve the speed of data reading and writing. Data is split into blocks and each block is written to a separate disk drive. RAID 10 also uses this technique.

3. Parity for redundancy (used in RAID 5 and RAID 6): This is a technique where the data is spread across all the drives and parity information is also written to the drive. This parity information can be used to rebuild data if a drive fails. However, RAID 10 does not use this technique.

Raid 10 uses which of the following techniquesQuestion 7Select one or more:a.Mirroring for redundancyb.Striping for speedc.Parity for redundancy

Question

Raid 10 uses which of the following techniques?

Solution

Similar Questions

Upgrade your grade with Knowee