describe and contrast the 4 stroke petrol engine cycle and Dieselcycle in relation to their P-v diagrams.
Question
Describe and contrast the 4 stroke petrol engine cycle and Diesel cycle in relation to their P-v diagrams.
Solution
The 4-stroke petrol engine cycle and the Diesel cycle are two different methods of converting fuel into mechanical energy in an internal combustion engine. Both of these cycles can be represented on a pressure-volume (P-v) diagram, which shows the changes in pressure and volume within the engine's cylinder throughout the cycle.
- 4-Stroke Petrol Engine Cycle:
-
Intake Stroke: The intake valve opens, and the piston moves down, decreasing the pressure inside the cylinder and drawing in a mixture of fuel and air.
-
Compression Stroke: The intake valve closes, and the piston moves up, compressing the fuel-air mixture and increasing its pressure.
-
Power Stroke: The spark plug ignites the fuel-air mixture, causing it to burn and expand rapidly. This forces the piston down and produces work.
-
Exhaust Stroke: The exhaust valve opens, and the piston moves up, expelling the burned gases from the cylinder.
On a P-v diagram, this cycle appears as a closed loop with a high-pressure spike during the power stroke.
- Diesel Cycle:
-
Intake Stroke: The intake valve opens, and the piston moves down, drawing in only air.
-
Compression Stroke: The intake valve closes, and the piston moves up, compressing the air and increasing its pressure and temperature.
-
Power Stroke: Near the top of the compression stroke, fuel is injected into the cylinder. The high temperature of the compressed air ignites the fuel, causing it to burn and expand, which forces the piston down and produces work.
-
Exhaust Stroke: The exhaust valve opens, and the piston moves up, expelling the burned gases from the cylinder.
On a P-v diagram, the Diesel cycle appears as a closed loop with a high-pressure spike during the power stroke, similar to the petrol engine cycle. However, the Diesel cycle has a higher compression ratio, resulting in a higher peak pressure.
In summary, the main difference between the 4-stroke petrol engine cycle and the Diesel cycle is the method of ignition: the petrol engine uses a spark plug to ignite a fuel-air mixture, while the Diesel engine relies on the heat of compressed air to ignite the fuel. This results in different P-v diagrams due to the differences in pressure and volume changes throughout the cycles.
Similar Questions
The ignition characteristics of diesel are expressed in terms ofa.Octane number b.Cetane numberc.Viscosity d. Flash and fire point
The ignition characteristics of diesel are expressed in terms ofa.Octane number b.Cetane numberc.Viscosity d. Flash and fire pointClear my choice
A closed cycle gas turbine works on which of the following cycles:Group of answer choicesRankine CycleJoule CycleEricsson CycleCarnot Cycle
Why does the two-stroke engine does not have a camshaft?*1 pointC. Camshaft is not neededD. All of the aboveB. It uses portsA. Has no valves
with the aid of sketches of the architecture diagram, discuss the FOUR (4) differences between a plug-in hybrid and a battery electric vehicle.
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.