The internal resistance of a source is 2 Ohms and is connected with an External load of 10 Ohms resistance. What is Rth ?
Question
Solution 1
Rth, or Thevenin's resistance, is the equivalent resistance of a network when looking from the output terminals. In this case, the network consists of a source with an internal resistance and an external load.
Thevenin's resistance can be calculated by adding the internal resistance of the source Knowee AI StudyGPT is a powerful AI-powered study tool designed to help you to solve study prob
Knowee AI StudyGPT is a powerful AI-powered study tool designed to help you to solve study problem.
Knowee AI StudyGPT is a powerful AI-powered study tool designed to help you to solve study problem.
Knowee AI StudyGPT is a powerful AI-powered study tool designed to help you to solve study problem.
Knowee AI StudyGPT is a powerful AI-powered study tool designed to help you to solv
Similar Questions
The source resistance from a 1.50 V D-cell is 1.5 ohms. The voltage that appears across a 75 ohms load will be1.47 V1.50 V1.53 V1.60 V
An a.c. voltage of peak value 20 V is connected in series with a silicon diode and load resistance of 500 Ω. If the forward resistance of diode is 10 Ω, find :
A patch has radiation resistance of 132 Ohms. The loss resistance is 9 Ohms. The radiation efficiency of the antenna is:
A dc ammeter has an internal resistance of 0.1 ohm. A shunt of 1.010 x 10^-3 ohm is connected to the ammeter. What is the multiplier of the setup?
A cylinder of a material is 10 cm long and has a cross section of 2 cm2. If its resistance along the length be 20 ohms, what will be its resistivity?