To avoid network bounce, what should be used with a bus topology?2.0 MarksTerminatorBNCVampire tapRJ-45

To avoid network bounce in a bus topology, a Terminator should be used.

Here's why:

1. In a bus topology, all devices are connected to a single cable, called the bus.

2. Signals that are sent on the bus travel from one end to the other.

3. Without a terminator at each end of the bus, these signals would keep bouncing back and forth along the bus. This is known as signal reflection or network bounce.

4. A terminator absorbs these signals when they reach the end of the bus, preventing network bounce.

5. Therefore, to avoid network bounce in a bus topology, a terminator should be used.

The other options listed - BNC, Vampire tap, and RJ-45 - are types of connectors used in different network setups, but they do not serve the same purpose as a terminator in preventing network bounce.